Browse by: "T"

The bacterial reverse mutation test uses amino-acid requiring at least five strains of Salmonella typhimurium and Escherichia coli to detect point mutations by base substitutions or frameshifts. The principle of this bacterial reverse mutation test is that it detects mutations which revert mutations present in the test strains and restore the functional capability of the bacteria to synthesize an essential amino acid.

Suspensions of bacterial cells are exposed to the test substance (liquid or solid) in the presence and in the absence of an exogenous metabolic activation system. At least five different analysable concentrations of the test substance should be used. The recommended maximum test concentration for soluble non-cytotoxic substances is 5 mg/plate or 5 ml/plate. There are two methods: the plate incorporation method and the preincubation method. For both techniques, after two or three days of incubation at 37°C, revertant colonies are counted and compared to the number of spontaneous revertant colonies on solvent control plates.

The purpose of the in vitro chromosome aberration test is to identify agents that cause structural chromosome aberrations in cultured mammalian somatic cells. Structural aberrations may be of two types: chromosome or chromatid.

The in vitro chromosome aberration test may employ cultures of established cell lines, cell strains or primary cell cultures. Cell cultures are exposed to the test substance (liquid or solid) both with and without metabolic activation during about 1.5 normal cell cycle lengths. At least three analysable concentrations of the test substance should be used. At each concentration duplicate cultures should normally be used. At predetermined intervals after exposure of cell cultures to the test substance, the cells are treated with a metaphase-arresting substance, harvested, stained. Metaphase cells are analysed microscopically for the presence of chromosome aberrations.

The purpose of the in vitro chromosome aberration test is to identify agents that cause structural chromosome aberrations in cultured mammalian somatic cells. Structural aberrations may be of two types: chromosome or chromatid.

The in vitro chromosome aberration test may employ cultures of established cell lines, cell strains or primary cell cultures. Cell cultures are exposed to the test substance (liquid or solid) both with and without metabolic activation during about 1.5 normal cell cycle lengths. At least three analysable concentrations of the test substance should be used. At each concentration duplicate cultures should normally be used. At predetermined intervals after exposure of cell cultures to the test substance, the cells are treated with a metaphase-arresting substance, harvested, stained. Metaphase cells are analysed microscopically for the presence of chromosome aberrations.

The purpose of the in vitro chromosome aberration test is to identify agents that cause structural chromosome aberrations in cultured mammalian somatic cells. Structural aberrations may be of two types: chromosome or chromatid.

The in vitro chromosome aberration test may employ cultures of established cell lines, cell strains or primary cell cultures. Cell cultures are exposed to the test substance (liquid or solid) both with and without metabolic activation during about 1.5 normal cell cycle lengths. At least three analysable concentrations of the test substance should be used. At each concentration duplicate cultures should normally be used. At predetermined intervals after exposure of cell cultures to the test substance, the cells are treated with a metaphase-arresting substance, harvested, stained. Metaphase cells are analysed microscopically for the presence of chromosome aberrations.

The mammalian in vivo micronucleus test is used for the detection of damage induced by the test substance to the chromosomes or the mitotic apparatus of erythroblasts, by analysis of erythrocytes as sampled in bone marrow and/or peripheral blood cells of animals, usually rodents (mice or rats).

The purpose of the micronucleus test is to identify substances (liquid or solid) that cause cytogenetic damage which results in the formation of micronuclei containing lagging chromosome fragments or whole chromosomes. An increase in the frequency of micronucleated polychromatic erythrocytes in treated animals is an indication of induced chromosome damage. Animals are exposed to the test substance by an appropriate route (usually by gavage using a stomach tube or a suitable intubation cannula, or by intraperitoneal injection). Bone marrow and/or blood cells are collected, prepared and stained. Preparations are analyzed for the presence of micronuclei. Each treated and control group must include at least 5 analysable animals per sex. Administration of the treatments consists of a single dose of test substance or two daily doses (or more). The limit dose is 2000 mg/kg/body weight/day for treatment up to 14 days, and 1000 mg/kg/body weight/day for treatment longer than 14 days.

The mammalian in vivo micronucleus test is used for the detection of damage induced by the test substance to the chromosomes or the mitotic apparatus of erythroblasts, by analysis of erythrocytes as sampled in bone marrow and/or peripheral blood cells of animals, usually rodents (mice or rats).

The purpose of the micronucleus test is to identify substances (liquid or solid) that cause cytogenetic damage which results in the formation of micronuclei containing lagging chromosome fragments or whole chromosomes. An increase in the frequency of micronucleated polychromatic erythrocytes in treated animals is an indication of induced chromosome damage. Animals are exposed to the test substance by an appropriate route (usually by gavage using a stomach tube or a suitable intubation cannula, or by intraperitoneal injection). Bone marrow and/or blood cells are collected, prepared and stained. Preparations are analyzed for the presence of micronuclei. Each treated and control group must include at least 5 analysable animals per sex. Administration of the treatments consists of a single dose of test substance or two daily doses (or more). The limit dose is 2000 mg/kg/body weight/day for treatment up to 14 days, and 1000 mg/kg/body weight/day for treatment longer than 14 days.

The mammalian in vivo micronucleus test is used for the detection of damage induced by the test substance to the chromosomes or the mitotic apparatus of erythroblasts, by analysis of erythrocytes as sampled in bone marrow and/or peripheral blood cells of animals, usually rodents (mice or rats).

The purpose of the micronucleus test is to identify substances (liquid or solid) that cause cytogenetic damage which results in the formation of micronuclei containing lagging chromosome fragments or whole chromosomes. An increase in the frequency of micronucleated polychromatic erythrocytes in treated animals is an indication of induced chromosome damage. Animals are exposed to the test substance by an appropriate route (usually by gavage using a stomach tube or a suitable intubation cannula, or by intraperitoneal injection). Bone marrow and/or blood cells are collected, prepared and stained. Preparations are analyzed for the presence of micronuclei. Each treated and control group must include at least 5 analysable animals per sex. Administration of the treatments consists of a single dose of test substance or two daily doses (or more). The limit dose is 2000 mg/kg/body weight/day for treatment up to 14 days, and 1000 mg/kg/body weight/day for treatment longer than 14 days.

The mammalian in vivo chromosome aberration test is used for the detection of structural chromosome aberrations induced by test compounds in bone marrow cells of animals, usually rodents (rats, mice and Chinese hamsters). Structural chromosome aberrations may be of two types: chromosome or chromatid.

Animals are exposed to the test substance (liquid or solid) by an appropriate route of exposure (usually by gavage using a stomach tube or a suitable intubation cannula, or by intraperitoneal injection) and are sacrificed at appropriate times after treatment. Prior to sacrifice, animals are treated with a metaphase-arresting agent. Chromosome preparations are then made from the bone marrow cells and stained, and metaphase cells are analysed for chromosome aberrations. Each treated and control group must include at least 5 analysable animals per sex. The limit dose is 2000 mg/kg/body weight/day for treatment up to 14 days, and 1000 mg/kg/body weight/day for treatment longer than 14 days.

The mammalian in vivo chromosome aberration test is used for the detection of structural chromosome aberrations induced by test compounds in bone marrow cells of animals, usually rodents (rats, mice and Chinese hamsters). Structural chromosome aberrations may be of two types: chromosome or chromatid.

Animals are exposed to the test substance (liquid or solid) by an appropriate route of exposure (usually by gavage using a stomach tube or a suitable intubation cannula, or by intraperitoneal injection) and are sacrificed at appropriate times after treatment. Prior to sacrifice, animals are treated with a metaphase-arresting agent. Chromosome preparations are then made from the bone marrow cells and stained, and metaphase cells are analysed for chromosome aberrations. Each treated and control group must include at least 5 analysable animals per sex. The limit dose is 2000 mg/kg/body weight/day for treatment up to 14 days, and 1000 mg/kg/body weight/day for treatment longer than 14 days.

The mammalian in vivo chromosome aberration test is used for the detection of structural chromosome aberrations induced by test compounds in bone marrow cells of animals, usually rodents (rats, mice and Chinese hamsters). Structural chromosome aberrations may be of two types: chromosome or chromatid.

Animals are exposed to the test substance (liquid or solid) by an appropriate route of exposure (usually by gavage using a stomach tube or a suitable intubation cannula, or by intraperitoneal injection) and are sacrificed at appropriate times after treatment. Prior to sacrifice, animals are treated with a metaphase-arresting agent. Chromosome preparations are then made from the bone marrow cells and stained, and metaphase cells are analysed for chromosome aberrations. Each treated and control group must include at least 5 analysable animals per sex. The limit dose is 2000 mg/kg/body weight/day for treatment up to 14 days, and 1000 mg/kg/body weight/day for treatment longer than 14 days.

The in vitro mammalian cell gene mutation test can be used to detect gene mutations induced by chemical substances. In this test, the used genetic endpoints measure mutation at hypoxanthine-guanine phosphoribosyl transferase (HPRT), and at a transgene of xanthineguanine phosphoribosyl transferase (XPRT). The HPRT and XPRT mutation tests detect different spectra of genetic events.

Cells in suspension or monolayer culture are exposed to, at least four analysable concentrations of the test substance, both with and without metabolic activation, for a suitable period of time. They are subcultured to determine cytotoxicity and to allow phenotypic expression prior to mutant selection. Cytotoxicity is usually determined by measuring the relative cloning efficiency (survival) or relative total growth of the cultures after the treatment period. The treated cultures are maintained in growth medium for a sufficient period of time, characteristic of each selected locus and cell type, to allow near-optimal phenotypic expression of induced mutations. Mutant frequency is determined by seeding known numbers of cells in medium containing the selective agent to detect mutant cells, and in medium without selective agent to determine the cloning efficiency (viability). After a suitable incubation time, colonies are counted.

The in vitro mammalian cell gene mutation test can be used to detect gene mutations induced by chemical substances. In this test, the used genetic endpoints measure mutation at hypoxanthine-guanine phosphoribosyl transferase (HPRT), and at a transgene of xanthineguanine phosphoribosyl transferase (XPRT). The HPRT and XPRT mutation tests detect different spectra of genetic events.

Cells in suspension or monolayer culture are exposed to, at least four analysable concentrations of the test substance, both with and without metabolic activation, for a suitable period of time. They are subcultured to determine cytotoxicity and to allow phenotypic expression prior to mutant selection. Cytotoxicity is usually determined by measuring the relative cloning efficiency (survival) or relative total growth of the cultures after the treatment period. The treated cultures are maintained in growth medium for a sufficient period of time, characteristic of each selected locus and cell type, to allow near-optimal phenotypic expression of induced mutations. Mutant frequency is determined by seeding known numbers of cells in medium containing the selective agent to detect mutant cells, and in medium without selective agent to determine the cloning efficiency (viability). After a suitable incubation time, colonies are counted.

The in vitro mammalian cell gene mutation test can be used to detect gene mutations induced by chemical substances. In the cell lines the most commonly-used genetic endpoints measure mutation at thymidine kinase (TK) and hypoxanthine-guanine phosphoribosyl transferase (HPRT), and a transgene of xanthineguanine phosphoribosyl transferase (XPRT). The TK, HPRT and XPRT mutation tests detect different spectra of genetic events.

Cells in suspension or monolayer culture are exposed to, at least four analysable concentrations of the test substance, both with and without metabolic activation, for a suitable period of time. They are subcultured to determine cytotoxicity and to allow phenotypic expression prior to mutant selection. It is recommended to utilise at least 106cells. Cytotoxicity is usually determined by measuring the relative cloning efficiency (survival) or relative total growth of the cultures after the treatment period. The treated cultures are maintained in growth medium for a sufficient period of time, characteristic of each selected locus and cell type, to allow near-optimal phenotypic expression of induced mutations. Mutant frequency is determined by seeding known numbers of cells in medium containing the selective agent to detect mutant cells, and in medium without selective agent to determine the cloning efficiency (viability). After a suitable incubation time, colonies are counted.

Dominant lethal (DL) effects cause embryonic or foetal death. Induction of a dominant lethal event after exposure to a test substance (liquid, solid, vapour or gas, …) indicates that the substance has affected germinal tissue of the test species. Dominant lethals are generally accepted to be the result of chromosomal aberrations (structural and numerical anomalies), but gene mutations and toxic effects cannot be excluded.

This Test Guideline recommends rats or mice as the test species. Generally, male animals are exposed to the test substance and mated to untreated virgin females. The most widely used is the single administration of the test substance by oral or by intraperitoneal injection. Normally, three dose levels should be used. The various germ cell stages can be tested separately by the use of sequential mating intervals. The females are sacrificed after an appropriate period of time, and the contents of the uteri are examined to determine the numbers of implants and live and dead embryos. The calculation of the dominant lethal effect is based on comparison of the live implants per female in the treated group to the live implants per female in the control group.

The purpose of the Dominant lethal (DL) test is to investigate whether chemical agents produce mutations resulting from chromosomal aberrations in germ cells. In addition, the dominant lethal test is relevant to assessing genotoxicity because, although they may vary among species, factors of in vivo metabolism, pharmacokinetics and DNA-repair processes are active and contribute to the response. Induction of a DL mutation after exposure to a test chemical indicates that the chemical has affected germinal tissue of the test animal.

This modified version of the Test Guideline reflects more than thirty years of experience with this test and the potential for integrating or combining this test with other toxicity tests such as developmental, reproductive toxicity, or genotoxicity studies; however due to its limitations and the use of a large number of animals this assay is not intended for use as a primary method, but rather as a supplemental test method which can only be used when there is no alternative for regulatory requirements.

The purpose of the Dominant lethal (DL) test is to investigate whether chemical agents produce mutations resulting from chromosomal aberrations in germ cells. In addition, the dominant lethal test is relevant to assessing genotoxicity because, although they may vary among species, factors of in vivo metabolism, pharmacokinetics and DNA-repair processes are active and contribute to the response. Induction of a DL mutation after exposure to a test chemical indicates that the chemical has affected germinal tissue of the test animal.

This modified version of the Test Guideline reflects more than thirty years of experience with this test and the potential for integrating or combining this test with other toxicity tests such as developmental, reproductive toxicity, or genotoxicity studies; however due to its limitations and the use of a large number of animals this assay is not intended for use as a primary method, but rather as a supplemental test method which can only be used when there is no alternative for regulatory requirements.